Manufacturing of Modacrylic Fibres
Modacrylic fibres are manufactured from copolymers containing acrylonitrile and other comonomers.
Their acrylonitrile content is more than 35% but less than 85%.
Halogen-containing comonomers are important in modacrylic manufacture because they contribute to the flame-retardant characteristics of the resulting polymer.
Examples include:
- Vinyl chloride
- Vinylidene chloride
- Vinyl bromide
11.1 Polymerisation of Modacrylic
Modacrylic polymers are produced by copolymerisation of acrylonitrile with suitable comonomers.
An example is the copolymerisation of vinyl chloride and acrylonitrile.
A reported historical process used approximately 60% vinyl chloride and 40% acrylonitrile. The polymer was produced by emulsion copolymerisation.
The vinyl chloride-to-acrylonitrile ratio was maintained by adding acrylonitrile at intervals.
The resulting copolymer was soluble in acetone and could be dry-spun.
This is an example of a modacrylic manufacturing route. It should not be treated as the universal process for every modacrylic fibre.
11.2 Spinning of Modacrylic Fibres
Modacrylic polymers are solution-spun rather than conventionally melt-spun because of their thermal behaviour.
The choice between wet spinning and dry spinning depends on the polymer composition and the solvent system.
For example, a vinyl chloride-acrylonitrile copolymer has been dry-spun from acetone.
Other commercial modacrylic products have used different combinations of polymerisation and spinning methods.
The exact operating conditions for all commercial modacrylic spinning routes are not available in the uploaded reference material.
11.3 General Manufacturing Sequence
Acrylonitrile + Suitable Comonomers
↓
Copolymerisation
↓
Polymer recovery or polymer solution formation
↓
Dissolution in suitable solvent, where required
↓
Spinning dope preparation
↓
Solution spinning
↓
Filament solidification
↓
Washing or solvent removal
↓
Drawing and finishing
↓
Drying and crimping, where required
↓
Cutting into staple fibres or winding as filament yarn
12. Difference Between Acrylic and Modacrylic Fibre Manufacturing
| Feature | Acrylic fibre | Modacrylic fibre |
|---|---|---|
| Acrylonitrile content | At least 85% | More than 35% but less than 85% |
| Main monomer | Acrylonitrile | Acrylonitrile |
| Comonomer content | Generally lower | Generally higher |
| Common comonomers | Methyl acrylate, vinyl acetate and other neutral or ionic comonomers | Vinyl chloride, vinylidene chloride and vinyl bromide |
| Polymerisation | Solution or aqueous dispersion polymerisation | Copolymerisation; specific routes depend on polymer composition |
| Spinning | Wet or dry solution spinning | Solution spinning |
| Melt spinning | Not normally possible because of thermal degradation | Not normally possible because of thermal degradation |
| Important characteristics | Bulk, elasticity, colour brilliance, easy washing and resistance to pilling | Flame-retardant characteristics |
| Major applications | Knitting yarns, hosiery, sweaters, blankets and carpets | Furnishing fabrics and pile fabrics |
Infographic

Discover more from Online Textile Academy
Subscribe to get the latest posts sent to your email.


