Manmade TextilesTextile Fibres

Polymerisation Methods Used in Acrylic Fibre Manufacturing

The polymerisation of acrylonitrile produces the fibre-forming polymer. The polymer must have a suitable composition, controlled molecular weight and appropriate dye-site content.

Two important polymerisation methods are used:

  1. Solution polymerisation
  2. Aqueous dispersion or suspension polymerisation

1.1 Solution Polymerisation

In solution polymerisation, acrylonitrile and the required comonomers are polymerised in a suitable solvent. The solvent provides the reaction medium and allows the polymer to remain in solution.

AIBN (azobisisobutyronitrile) is one of the initiators used in the described solution-polymerisation examples.

DMF (dimethylformamide) is one of the solvents used in this process.

General process flowchart:

Acrylonitrile + Comonomers
↓
Solvent and initiator addition
↓
Polymerisation
↓
Polymer solution formation
↓
Removal of unreacted monomer
↓
Preparation of spinning dope
↓
Spinning

One advantage of solution polymerisation is that the polymer solution can be converted directly into a spinning dope after removal of unreacted monomer.

Limitations of solution polymerisation

  • Chain termination can occur rapidly because of high chain mobility in solution.
  • Incorporation of some non-volatile comonomers can be difficult.
  • Recovery of non-volatile monomers from the reaction medium can be difficult.
  • The choice of polymerisation solvent is limited.
  • Solvent selection must be suitable for the intended spinning process.

1.2 Aqueous Dispersion or Suspension Polymerisation

Aqueous dispersion polymerisation is widely used in acrylic fibre manufacturing. In this process, acrylonitrile and comonomers are polymerised in an aqueous medium. The polymer forms as a dispersed solid because it is insoluble in water. Radical initiators are used to start the polymerisation reaction.

Examples include:

  • Persulphates
  • Perchlorates
  • Hydrogen peroxide

A commonly used redox initiator system contains:

ComponentFunction
Ammonium or potassium persulphateOxidising agent
Sodium bisulphiteReducing agent
Ferric or ferrous ironCatalyst for radical formation

The redox system operates at a pH between 2 and 4. It also helps introduce sulphate and sulphonate end groups into the polymer, which can provide dye sites.

General process flowchart:

Acrylonitrile + Comonomers
↓
Preparation of aqueous reaction medium
↓
Addition of redox initiator system
↓
Formation of free radicals
↓
Polymerisation and particle formation
↓
Recovery of polymer by filtration
↓
Wet polymer cake
↓
Dissolution in a suitable spinning solvent
↓
Spinning dope preparation

1.3 Comparison of Solution and Aqueous Dispersion Polymerisation

FeatureSolution polymerisationAqueous dispersion polymerisation
Reaction mediumOrganic solvent or suitable solvent systemWater
Polymer formationPolymer remains in solutionPolymer forms as dispersed particles
InitiatorExamples include AIBNPersulphates, perchlorates or hydrogen peroxide
Polymer recoveryPolymer solution can be used after removal of unreacted monomerPolymer is generally recovered by filtration
Spinning dope preparationPolymer solution can be converted into spinning dopeRecovered polymer is dissolved in a suitable spinning solvent

Infographics

Infographic showing four free-radical polymerisation methods used in acrylic fibre manufacturing: solution, aqueous dispersion, emulsion and bulk polymerisation.

Discover more from Online Textile Academy

Subscribe to get the latest posts sent to your email.

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button
error: Content is protected !!

Adblock Detected

Please consider supporting us by disabling your ad blocker